kevadesu/TylkoLinux
1
0
Fork 0
mirror of https://github.com/kevadesu/TylkoLinux.git synced 2025-07-15 00:19:26 +02:00
Code Issues Projects Releases Packages Wiki Activity
TylkoLinux/Einrichter-in-chroot.sh

2972 lines
No EOL
104 KiB
Bash
Executable file
Raw Blame History

#!/bin/bash
echo "[i] Verifying if /dev/null is a device"
if [ ! -c /dev/null ]; then
echo "[!] /dev/null appears to NOT be a device! This issue will be repaired."
rm -f /dev/null
mknod -m 666 /dev/null c 1 3
chown root:root /dev/null
if [ ! -c /dev/null ]; then
echo "[!] The issue could not be repaired. Manual intervention is required."
/bin/sh
fi
echo "/dev/null has been fixed."
fi
echo "PATH=/usr/bin:/usr/local/bin:/usr/sbin" > /etc/environment
chmod 755 /bin/bash
chown root:root /bin/bash
echo "Switched to Einrichter-in-chroot mode. Type eic.help for list of commands, exit to exit."
function main() {
read -p "einrichter/eic> " OPT
$OPT
main
}
function eic.help() {
echo "
eic.dirs.create - set up directories
eic.essentials.create - set up essentials
eic.essentials.install - install essential tools
eic.essentials.verify - verify installation
eic.clean - clean up environment
eic.bugfix.RrX - runs bugfix RrX which extracts the packages again
eic.system.build - build the system
eic.system.build.gcc - build GCC. this has been put in a separate function because building GCC alone takes 46 SBU.
eic.system.build.continue - continue building the system after successfully building GCC
eic.strip - removes unnecessary debug symbols
eic.system.build.clean - clean up files after the build process
eic.config.network.devicenaming - sets up network interface names
eic.config.network.staticip - creates basic config for static ip
eic.config.network.dhcp - sets up a basic IPv4 DHCP config
eic.config.network.systemd.resolve <on/off/enable/disable> - enables/disables systemd-resolved service
eic.config.network.hostname <hostname> - writes hostname to /etc/hostname
eic.config.network.staticresolver - use static /etc/resolv.conf configuration after disabling systemd-resolved
eic.config.time.createAdj - adjust /etc/adjtime to local time if hardware clock is set to that
eic.config.time.clarifyUTC - tell systemd-timedated your hardware clock is set to UTC/Local Time (only works when booted)
eic.config.time.set - enter the time to set in YYYY-MM-DD HH:MM:SS format (only works when booted)
eic.config.time.tz <timezone> - set a timezone. use command 'timedatectl list-timezones' to get a list of all timezones (only works when booted)
eic.config.time.nts <on/off/enable/disable> - switch systemd's Network Time Synchronisation on or off
eic.config.console.preset - wipe /etc/vconsole.conf and simply write 'FONT=Lat2-Terminus16' to it
eic.config.console.keymap <KEYMAP> - write default keymap to /etc/vconsole.conf
eic.config.create.inputrc - creates the simple but necessary /etc/inputrc file
eic.config.create.shells - creates the simple but necessary /etc/shells file
eic.config.systemd.disableScreenClearing <yes/no> - decide whether systemd should clear the screen at the end of the boot sequence or not
eic.config.systemd.limitCoreDumpSize <(Number)(G/M/K/B) - limits core dump size to value specified as argument
eic.linux.install - the final boss: install the Linux kernel to the system. can take 0.4-32 SBUs (typically 2.5), MIGHT also be heavy
eic.rpm.install - installs RPM
eic.tdnf.install - installs VMware Photon's RPM frontend: TDNF (tiny dandified yum)
eic.help - show this message
"
}
function eic.dirs.create() {
mkdir -pv /{boot,home,mnt,opt,srv}
mkdir -pv /etc/{opt,sysconfig}
mkdir -pv /lib/firmware
mkdir -pv /media/{floppy,cdrom}
mkdir -pv /usr/{,local/}{include,src}
mkdir -pv /usr/lib/locale
mkdir -pv /usr/local/{bin,lib,sbin}
mkdir -pv /usr/{,local/}share/{color,dict,doc,info,locale,man}
mkdir -pv /usr/{,local/}share/{misc,terminfo,zoneinfo}
mkdir -pv /usr/{,local/}share/man/man{1..8}
mkdir -pv /var/{cache,local,log,mail,opt,spool}
mkdir -pv /var/lib/{color,misc,locate}
ln -sfv /run /var/run
ln -sfv /run/lock /var/lock
install -dv -m 0750 /root
install -dv -m 1777 /tmp /var/tmp
}
function eic.essentials.create() {
ln -s /bin/bash /bin/sh
ln -sv /proc/self/mounts /etc/mtab
cat > /etc/hosts << EOF
127.0.0.1 localhost $(hostname)
::1 localhost
EOF
cat > /etc/passwd << "EOF"
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/dev/null:/usr/bin/false
daemon:x:6:6:Daemon User:/dev/null:/usr/bin/false
messagebus:x:18:18:D-Bus Message Daemon User:/run/dbus:/usr/bin/false
systemd-journal-gateway:x:73:73:systemd Journal Gateway:/:/usr/bin/false
systemd-journal-remote:x:74:74:systemd Journal Remote:/:/usr/bin/false
systemd-journal-upload:x:75:75:systemd Journal Upload:/:/usr/bin/false
systemd-network:x:76:76:systemd Network Management:/:/usr/bin/false
systemd-resolve:x:77:77:systemd Resolver:/:/usr/bin/false
systemd-timesync:x:78:78:systemd Time Synchronization:/:/usr/bin/false
systemd-coredump:x:79:79:systemd Core Dumper:/:/usr/bin/false
uuidd:x:80:80:UUID Generation Daemon User:/dev/null:/usr/bin/false
systemd-oom:x:81:81:systemd Out Of Memory Daemon:/:/usr/bin/false
nobody:x:65534:65534:Unprivileged User:/dev/null:/usr/bin/false
EOF
cat > /etc/group << "EOF"
root:x:0:
bin:x:1:daemon
sys:x:2:
kmem:x:3:
tape:x:4:
tty:x:5:
daemon:x:6:
floppy:x:7:
disk:x:8:
lp:x:9:
dialout:x:10:
audio:x:11:
video:x:12:
utmp:x:13:
cdrom:x:15:
adm:x:16:
messagebus:x:18:
systemd-journal:x:23:
input:x:24:
mail:x:34:
kvm:x:61:
systemd-journal-gateway:x:73:
systemd-journal-remote:x:74:
systemd-journal-upload:x:75:
systemd-network:x:76:
systemd-resolve:x:77:
systemd-timesync:x:78:
systemd-coredump:x:79:
uuidd:x:80:
systemd-oom:x:81:
wheel:x:97:
users:x:999:
nogroup:x:65534:
EOF
localedef -i C -f UTF-8 C.UTF-8
echo "tester:x:101:101::/home/tester:/bin/bash" >> /etc/passwd
echo "tester:x:101:" >> /etc/group
install -o tester -d /home/tester
touch /var/log/{btmp,lastlog,faillog,wtmp}
chgrp -v utmp /var/log/lastlog
chmod -v 664 /var/log/lastlog
chmod -v 600 /var/log/btmp
}
function eic.essentials.install() {
pushd /sources/ || eic.error D404_SRC
pushd gettext/
./configure --disable-shared
make
cp -v gettext-tools/src/{msgfmt,msgmerge,xgettext} /usr/bin
popd
pushd bison/
./configure --prefix=/usr \
--docdir=/usr/share/doc/bison-3.8.2
make
make install
popd
pushd perl/
sh Configure -des \
-D prefix=/usr \
-D vendorprefix=/usr \
-D useshrplib \
-D privlib=/usr/lib/perl5/5.40/core_perl \
-D archlib=/usr/lib/perl5/5.40/core_perl \
-D sitelib=/usr/lib/perl5/5.40/site_perl \
-D sitearch=/usr/lib/perl5/5.40/site_perl \
-D vendorlib=/usr/lib/perl5/5.40/vendor_perl \
-D vendorarch=/usr/lib/perl5/5.40/vendor_perl
make
make install
popd
pushd python/
./configure --prefix=/usr \
--enable-shared \
--without-ensurepip
make
make install
popd
pushd texinfo/
./configure --prefix=/usr
make
make install
popd
pushd util-linux/
mkdir -pv /var/lib/hwclock
./configure --libdir=/usr/lib \
--runstatedir=/run \
--disable-chfn-chsh \
--disable-login \
--disable-nologin \
--disable-su \
--disable-setpriv \
--disable-runuser \
--disable-pylibmount \
--disable-static \
--disable-liblastlog2 \
--without-python \
ADJTIME_PATH=/var/lib/hwclock/adjtime \
--docdir=/usr/share/doc/util-linux-2.40.2
make
make install
popd
popd
}
function eic.essentials.verify() {
ver_check Gettext gettext 0.22.5
ver_check Bison bison 3.8.2
ver_check Perl perl 5.40.0
ver_check Python python3 3.12.5
ver_check Texinfo info 7.1
ver_check Util-linux cal 2.40.2
}
function eic.clean() {
rm -rf /usr/share/{info,man,doc}/*
find /usr/{lib,libexec} -name \*.la -delete
rm -rf /tools
}
function eic.system.build() {
pushd /sources
pushd man-pages
rm -v man3/crypt*
make prefix=/usr install
popd
pushd iana-etc-20240806
cp services protocols /etc
popd
pushd glibc/
patch -Np1 -i ../glibc-2.40-fhs-1.patch
rm -r build
mkdir -v build
cd build
echo "rootsbindir=/usr/sbin" > configparms
../configure --prefix=/usr \
--disable-werror \
--enable-kernel=4.19 \
--enable-stack-protector=strong \
--disable-nscd \
libc_cv_slibdir=/usr/lib
make
make check
echo "[!] Please read!
There are cases where Glibc fails the test, and in SOME cases they may be safe to ignore!
Please read the recent output to see if only two to three test failed.
If io/tst-lchmod failed, that is normal. It is known to fail in the TylkoLinux live environment."
echo "[i] Some tests, for example nss/tst-nss-files-hosts-multi and nptl/tst-thread-affinity\* are known to fail due to a timeout (especially when the system is relatively slow and/or running the test suite with multiple parallel make jobs). These tests can be identified with:
$ grep \"Timed out\" \$(find -name \*.out)
It is possible to re-run a single test with enlarged timeout with \"TIMEOUTFACTOR=<factor> make test t=<test name>\". For example, \"TIMEOUTFACTOR=10 make test t=nss/tst-nss-files-hosts-multi\" will re-run nss/tst-nss-files-hosts-multi with ten times the original timeout.
Additionally, some tests may fail with a relatively old CPU model (for example elf/tst-cpu-features-cpuinfo) or host kernel version (for example stdlib/tst-arc4random-thread).
"
read -p "[i] To enter a shell and verify the test (or re-run), press enter now. " OPT
echo "[i] Run \"exit\" to return to the installer when done."
/bin/sh
touch /etc/ld.so.conf
sed '/test-installation/s@$(PERL)@echo not running@' -i ../Makefile
make install
sed '/RTLDLIST=/s@/usr@@g' -i /usr/bin/ldd
localedef -i C -f UTF-8 C.UTF-8
localedef -i cs_CZ -f UTF-8 cs_CZ.UTF-8
localedef -i de_DE -f ISO-8859-1 de_DE
localedef -i de_DE@euro -f ISO-8859-15 de_DE@euro
localedef -i de_DE -f UTF-8 de_DE.UTF-8
localedef -i el_GR -f ISO-8859-7 el_GR
localedef -i en_GB -f ISO-8859-1 en_GB
localedef -i en_GB -f UTF-8 en_GB.UTF-8
localedef -i en_HK -f ISO-8859-1 en_HK
localedef -i en_PH -f ISO-8859-1 en_PH
localedef -i en_US -f ISO-8859-1 en_US
localedef -i en_US -f UTF-8 en_US.UTF-8
localedef -i es_ES -f ISO-8859-15 es_ES@euro
localedef -i es_MX -f ISO-8859-1 es_MX
localedef -i fa_IR -f UTF-8 fa_IR
localedef -i fr_FR -f ISO-8859-1 fr_FR
localedef -i fr_FR@euro -f ISO-8859-15 fr_FR@euro
localedef -i fr_FR -f UTF-8 fr_FR.UTF-8
localedef -i is_IS -f ISO-8859-1 is_IS
localedef -i is_IS -f UTF-8 is_IS.UTF-8
localedef -i it_IT -f ISO-8859-1 it_IT
localedef -i it_IT -f ISO-8859-15 it_IT@euro
localedef -i it_IT -f UTF-8 it_IT.UTF-8
localedef -i ja_JP -f EUC-JP ja_JP
localedef -i ja_JP -f SHIFT_JIS ja_JP.SJIS 2> /dev/null || true
localedef -i ja_JP -f UTF-8 ja_JP.UTF-8
localedef -i nl_NL@euro -f ISO-8859-15 nl_NL@euro
localedef -i ru_RU -f KOI8-R ru_RU.KOI8-R
localedef -i ru_RU -f UTF-8 ru_RU.UTF-8
localedef -i se_NO -f UTF-8 se_NO.UTF-8
localedef -i ta_IN -f UTF-8 ta_IN.UTF-8
localedef -i tr_TR -f UTF-8 tr_TR.UTF-8
localedef -i zh_CN -f GB18030 zh_CN.GB18030
localedef -i zh_HK -f BIG5-HKSCS zh_HK.BIG5-HKSCS
localedef -i zh_TW -f UTF-8 zh_TW.UTF-8
echo "[i] Add an additional locale you'd like to add by defining it in the shell below, using the localedef command. Exit when done."
/bin/sh
localedef -i C -f UTF-8 C.UTF-8
localedef -i ja_JP -f SHIFT_JIS ja_JP.SJIS 2> /dev/null || true
cat > /etc/nsswitch.conf << "EOF"
# Begin /etc/nsswitch.conf
passwd: files systemd
group: files systemd
shadow: files systemd
hosts: mymachines resolve [!UNAVAIL=return] files myhostname dns
networks: files
protocols: files
services: files
ethers: files
rpc: files
# End /etc/nsswitch.conf
EOF
tar -xvf ../../tzdata2024a.tar.gz
ZONEINFO=/usr/share/zoneinfo
mkdir -pv $ZONEINFO/{posix,right}
for tz in etcetera southamerica northamerica europe africa antarctica \
asia australasia backward; do
zic -L /dev/null -d $ZONEINFO ${tz}
zic -L /dev/null -d $ZONEINFO/posix ${tz}
zic -L leapseconds -d $ZONEINFO/right ${tz}
done
cp -v zone.tab zone1970.tab iso3166.tab $ZONEINFO
zic -d $ZONEINFO -p America/New_York
unset ZONEINFO
eic.system.build.tz() {
tzselect
read -p "[i] Type the timezone that has been outputted (with the slash): " TZ
ln -sfv /usr/share/zoneinfo/$TZ /etc/localtime || eic.system.build.tz
}
eic.system-build.tz
cat > /etc/ld.so.conf << "EOF"
# Begin /etc/ld.so.conf
/usr/local/lib
/opt/lib
EOF
cat >> /etc/ld.so.conf << "EOF"
# Add an include directory
include /etc/ld.so.conf.d/*.conf
EOF
mkdir -pv /etc/ld.so.conf.d
popd
pushd zlib/
./configure --prefix=/usr
make
make check
make install
rm -fv /usr/lib/libz.a
popd
pushd bzip2/
patch -Np1 -i ../bzip2-1.0.8-install_docs-1.patch
sed -i 's@\(ln -s -f \)$(PREFIX)/bin/@\1@' Makefile
sed -i "s@(PREFIX)/man@(PREFIX)/share/man@g" Makefile
make -f Makefile-libbz2_so
make clean
make CFLAGS="-fPIC" LDFLAGS="-fPIC"
make PREFIX=/usr install
cp -av libbz2.so.* /usr/lib
ln -sv libbz2.so.1.0.8 /usr/lib/libbz2.so
cp -v bzip2-shared /usr/bin/bzip2
for i in /usr/bin/{bzcat,bunzip2}; do
ln -sfv bzip2 $i
done
rm -fv /usr/lib/libbz2.a
popd
pushd xz/
./configure --prefix=/usr \
--disable-static \
--docdir=/usr/share/doc/xz-5.6.2
make
make check
make install
popd
pushd lz4/
make BUILD_STATIC=no PREFIX=/usr
make -j1 check
make BUILD_STATIC=no PREFIX=/usr install
popd
pushd zstd/
make prefix=/usr
make check
make prefix=/usr install
rm -v /usr/lib/libzstd.a
popd
pushd file/
./configure --prefix=/usr
make
make check
make install
popd
pushd readline/
sed -i '/MV.*old/d' Makefile.in
sed -i '/{OLDSUFF}/c:' support/shlib-install
sed -i 's/-Wl,-rpath,[^ ]*//' support/shobj-conf
./configure --prefix=/usr \
--disable-static \
--with-curses \
--docdir=/usr/share/doc/readline-8.2.13
make SHLIB_LIBS="-lncursesw"
make SHLIB_LIBS="-lncursesw" install
install -v -m644 doc/*.{ps,pdf,html,dvi} /usr/share/doc/readline-8.2.13
popd
pushd m4/
./configure --prefix=/usr
make
make check
make install
popd
pushd bc/
CC=gcc ./configure --prefix=/usr -G -O3 -r
make
make test
make install
popd
pushd flex/
./configure --prefix=/usr \
--docdir=/usr/share/doc/flex-2.6.4 \
--disable-static
make
make check
make install
ln -sv flex /usr/bin/lex
ln -sv flex.1 /usr/share/man/man1/lex.1
popd
pushd tcl/
SRCDIR=$(pwd)
cd unix
./configure --prefix=/usr \
--mandir=/usr/share/man \
--disable-rpath
make
sed -e "s|$SRCDIR/unix|/usr/lib|" \
-e "s|$SRCDIR|/usr/include|" \
-i tclConfig.sh
sed -e "s|$SRCDIR/unix/pkgs/tdbc1.1.7|/usr/lib/tdbc1.1.7|" \
-e "s|$SRCDIR/pkgs/tdbc1.1.7/generic|/usr/include|" \
-e "s|$SRCDIR/pkgs/tdbc1.1.7/library|/usr/lib/tcl8.6|" \
-e "s|$SRCDIR/pkgs/tdbc1.1.7|/usr/include|" \
-i pkgs/tdbc1.1.7/tdbcConfig.sh
sed -e "s|$SRCDIR/unix/pkgs/itcl4.2.4|/usr/lib/itcl4.2.4|" \
-e "s|$SRCDIR/pkgs/itcl4.2.4/generic|/usr/include|" \
-e "s|$SRCDIR/pkgs/itcl4.2.4|/usr/include|" \
-i pkgs/itcl4.2.4/itclConfig.sh
unset SRCDIR
make test
make install
chmod -v u+w /usr/lib/libtcl8.6.so
make install-private-headers
ln -sfv tclsh8.6 /usr/bin/tclsh
mv /usr/share/man/man3/{Thread,Tcl_Thread}.3
cd ..
tar -xf ../tcl8.6.14-html.tar.gz --strip-components=1
mkdir -v -p /usr/share/doc/tcl-8.6.14
cp -v -r ./html/* /usr/share/doc/tcl-8.6.14
popd
pushd expect/
eic.system.build.expect.intervention() {
if [[ $(python3 -c 'from pty import spawn; spawn(["echo", "ok"])') != "ok" ]]; then
echo "[i] PS: The error is caused by the chroot environment not being set up for proper PTY operation."
read -p "[!] Answer unexpected. Continue, enter shell or quit? [c/s/q]: " OPT
case "$OPT" in
c)
echo "OK!"
;;
s)
/bin/sh
eic.system.build.expect.intervention
;;
q)
exit 1
;;
*)
echo "Invalid command!"
eic.system.build.expect.intervention
;;
esac
fi
}
eic.system.build.expect.intervention
patch -Np1 -i ../expect-5.45.4-gcc14-1.patch
./configure --prefix=/usr \
--with-tcl=/usr/lib \
--enable-shared \
--disable-rpath \
--mandir=/usr/share/man \
--with-tclinclude=/usr/include
make
make test
make install
ln -svf expect5.45.4/libexpect5.45.4.so /usr/lib
popd
pushd dejagnu/
mkdir -v build
cd build
../configure --prefix=/usr
makeinfo --html --no-split -o doc/dejagnu.html ../doc/dejagnu.texi
makeinfo --plaintext -o doc/dejagnu.txt ../doc/dejagnu.texi
make check
make install
install -v -dm755 /usr/share/doc/dejagnu-1.6.3
install -v -m644 doc/dejagnu.{html,txt} /usr/share/doc/dejagnu-1.6.3
popd
pushd pkgconf/
./configure --prefix=/usr \
--disable-static \
--docdir=/usr/share/doc/pkgconf-2.3.0
make
make install
ln -sv pkgconf /usr/bin/pkg-config
ln -sv pkgconf.1 /usr/share/man/man1/pkg-config.1
popd
pushd binutils/
rm -r build
mkdir -v build
cd build
../configure --prefix=/usr \
--sysconfdir=/etc \
--enable-gold \
--enable-ld=default \
--enable-plugins \
--enable-shared \
--disable-werror \
--enable-64-bit-bfd \
--enable-new-dtags \
--with-system-zlib \
--enable-default-hash-style=gnu
make tooldir=/usr
make -k check
grep '^FAIL:' $(find -name '*.log')
make tooldir=/usr install
rm -fv /usr/lib/lib{bfd,ctf,ctf-nobfd,gprofng,opcodes,sframe}.a
popd
pushd gmp/
./configure --prefix=/usr \
--enable-cxx \
--disable-static \
--host=none-linux-gnu \
--docdir=/usr/share/doc/gmp-6.3.0
make
make html
make check 2>&1 | tee gmp-check-log
GMP_CHECK=$(awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log)
eic.system.build.gmp.intervention() {
if [ ! "$GMP_CHECK" -ge "199" ]; then
echo "[i] PS: The check did not reach the minimum amount of passed tests required."
read -p "[!] Answer unexpected. Continue, enter shell or quit? [c/s/q]: " OPT
case "$OPT" in
c)
echo "OK!"
;;
s)
/bin/sh
eic.system.build.gmp.intervention
;;
q)
exit 1
;;
*)
echo "Invalid command!"
eic.system.build.gmp.intervention
;;
esac
fi
}
eic.system.build.gmp.intervention
make install
make install-html
popd
pushd mpfr/
./configure --prefix=/usr \
--disable-static \
--enable-thread-safe \
--docdir=/usr/share/doc/mpfr-4.2.1
make
make html
make check
make install
make install-html
popd
pushd mpc/
./configure --prefix=/usr \
--disable-static \
--docdir=/usr/share/doc/mpc-1.3.1
make
make html
make check
make install
make install-html
popd
pushd attr/
./configure --prefix=/usr \
--disable-static \
--sysconfdir=/etc \
--docdir=/usr/share/doc/attr-2.5.2
make
make check
make install
popd
pushd acl/
./configure --prefix=/usr \
--disable-static \
--docdir=/usr/share/doc/acl-2.3.2
make
make install
popd
pushd libcap/
sed -i '/install -m.*STA/d' libcap/Makefile
make prefix=/usr lib=lib
make test
make prefix=/usr lib=lib install
popd
pushd libxcrypt/
./configure --prefix=/usr \
--enable-hashes=strong,glibc \
--enable-obsolete-api=no \
--disable-static \
--disable-failure-tokens
make
make check
make install
echo "[i] Reinstalling with ABIv1 features..."
make distclean
./configure --prefix=/usr \
--enable-hashes=strong,glibc \
--enable-obsolete-api=glibc \
--disable-static \
--disable-failure-tokens
make
cp -av --remove-destination .libs/libcrypt.so.1* /usr/lib
popd
pushd shadow/
sed -i 's/groups$(EXEEXT) //' src/Makefile.in
find man -name Makefile.in -exec sed -i 's/groups\.1 / /' {} \;
find man -name Makefile.in -exec sed -i 's/getspnam\.3 / /' {} \;
find man -name Makefile.in -exec sed -i 's/passwd\.5 / /' {} \;
sed -e 's:#ENCRYPT_METHOD DES:ENCRYPT_METHOD YESCRYPT:' \
-e 's:/var/spool/mail:/var/mail:' \
-e '/PATH=/{s@/sbin:@@;s@/bin:@@}' \
-i etc/login.defs
touch /usr/bin/passwd
./configure --sysconfdir=/etc \
--disable-static \
--with-{b,yes}crypt \
--without-libbsd \
--with-group-name-max-length=32
make
make exec_prefix=/usr install
make -C man install-man
pwconv
grpconv
mkdir -p /etc/default
useradd -D --gid 999
sed -i '/MAIL/s/yes/no/' /etc/default/useradd
echo "[i] Set the new root password."
passwd root
popd
popd
}
function eic.system.build.gcc() {
pushd /sources/
pushd gcc/
case $(uname -m) in
x86_64)
sed -e '/m64=/s/lib64/lib/' \
-i.orig gcc/config/i386/t-linux64
;;
esac
rm -rv build
mkdir -v build
cd build
../configure --prefix=/usr \
LD=ld \
--enable-languages=c,c++ \
--enable-default-pie \
--enable-default-ssp \
--enable-host-pie \
--disable-multilib \
--disable-bootstrap \
--disable-fixincludes \
--with-system-zlib
make
ulimit -s -H unlimited
sed -e '/cpython/d' -i ../gcc/testsuite/gcc.dg/plugin/plugin.exp
sed -e 's/no-pic /&-no-pie /' -i ../gcc/testsuite/gcc.target/i386/pr113689-1.c
sed -e 's/300000/(1|300000)/' -i ../libgomp/testsuite/libgomp.c-c++-common/pr109062.c
sed -e 's/{ target nonpic } //' \
-e '/GOTPCREL/d' -i ../gcc/testsuite/gcc.target/i386/fentryname3.c
eic.system.build.gcc.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? [R/S/Q]: " OPT
case "$OPT" in
R)
chown -R tester .
su tester -c "PATH=$PATH make -k check"
../contrib/test_summary > /eilogs/8.29-gcc-test.log
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.gcc.ask
;;
esac
}
eic.system.build.gcc.ask
read -p "[i] Press enter to continue." ANY
make install
chown -v -R root:root \
/usr/lib/gcc/$(gcc -dumpmachine)/14.2.0/include{,-fixed}
ln -svr /usr/bin/cpp /usr/lib
ln -sv gcc.1 /usr/share/man/man1/cc.1
ln -sfv ../../libexec/gcc/$(gcc -dumpmachine)/14.2.0/liblto_plugin.so \
/usr/lib/bfd-plugins/
echo 'int main(){}' > dummy.c
cc dummy.c -v -Wl,--verbose &> dummy.log
readelf -l a.out | grep ': /lib'
grep -E -o '/usr/lib.*/S?crt[1in].*succeeded' dummy.log || read -p "[!] The toolchain did not find the correct start files. Press enter to continue." ANY
grep -B4 '^ /usr/include' dummy.log || read -p "[!] The toolchain did not find the correct header files. Press enter to continue." ANY
grep 'SEARCH.*/usr/lib' dummy.log |sed 's|; |\n|g' || read -p "[!] The toolchain was unable to verify that the new linker is being used with the correct search paths. Press enter to continue." ANY
grep "/lib.*/libc.so.6 " dummy.log || read -p "[!] The toolchain did not find the correct libc. Press enter to continue." ANY
grep found dummy.log || read -p "[!] The toolchain did not find the correct dynamic linker. Press enter to continue." ANY
rm -v dummy.c a.out dummy.log
mkdir -pv /usr/share/gdb/auto-load/usr/lib
mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib
popd
popd
echo "[i] Finished building GCC"
}
function eic.system.build.continue() {
pushd /sources/
pushd ncurses/
./configure --prefix=/usr \
--mandir=/usr/share/man \
--with-shared \
--without-debug \
--without-normal \
--with-cxx-shared \
--enable-pc-files \
--with-pkg-config-libdir=/usr/lib/pkgconfig
make
make DESTDIR=$PWD/dest install
install -vm755 dest/usr/lib/libncursesw.so.6.5 /usr/lib
rm -v dest/usr/lib/libncursesw.so.6.5
sed -e 's/^#if.*XOPEN.*$/#if 1/' \
-i dest/usr/include/curses.h
cp -av dest/* /
for lib in ncurses form panel menu ; do
ln -sfv lib${lib}w.so /usr/lib/lib${lib}.so
ln -sfv ${lib}w.pc /usr/lib/pkgconfig/${lib}.pc
done
ln -sfv libncursesw.so /usr/lib/libcurses.so
cp -v -R doc -T /usr/share/doc/ncurses-6.5
popd
pushd sed/
./configure --prefix=/usr
make
make html
chown -R tester .
su tester -c "PATH=$PATH make check"
make install
install -d -m755 /usr/share/doc/sed-4.9
install -m644 doc/sed.html /usr/share/doc/sed-4.9
popd
pushd psmisc/
./configure --prefix=/usr
make
make check
make install
popd
pushd gettext/
./configure --prefix=/usr \
--disable-static \
--docdir=/usr/share/doc/gettext-0.22.5
make
eic.system.build.continue.gettext.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? (~3 SBUs) [R/S/Q]: " OPT
case "$OPT" in
R)
make check > /eilogs/8.33-gettext-test.log
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.continue.gettext.ask
;;
esac
}
eic.system.build.continue.gettext.ask
make install
chmod -v 0755 /usr/lib/preloadable_libintl.so
popd
pushd bison/
./configure --prefix=/usr --docdir=/usr/share/doc/bison-3.8.2
make
eic.system.build.continue.bison.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? (~3 SBUs) [R/S/Q]: " OPT
case "$OPT" in
R)
make check > /eilogs/8.34-bison-test.log
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.continue.bison.ask
;;
esac
}
eic.system.build.continue.bison.ask
make install
popd
pushd grep/
sed -i "s/echo/#echo/" src/egrep.sh
./configure --prefix=/usr
make
make check
make install
popd
pushd bash/
./configure --prefix=/usr \
--without-bash-malloc \
--with-installed-readline \
bash_cv_strtold_broken=no \
--docdir=/usr/share/doc/bash-5.2.32
make
eic.system.build.continue.bash.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? (~3 SBUs) [R/S/Q]: " OPT
case "$OPT" in
R)
chown -R tester .
su -s /usr/bin/expect tester << "EOF"
set timeout -1
spawn make tests
expect eof
lassign [wait] _ _ _ value
exit $value
EOF
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.continue.bash.ask
;;
esac
}
eic.system.build.continue.bash.ask
make install
popd
pushd libtool/
./configure --prefix=/usr
make
make -k check > /eilogs/8.37-libtool-test.log
make install
rm -fv /usr/lib/libltdl.a
popd
pushd gdbm/
./configure --prefix=/usr \
--disable-static \
--enable-libgdbm-compat
make
make check
make install
popd
pushd gperf/
./configure --prefix=/usr --docdir=/usr/share/doc/gperf-3.1
make
make -j1 check
make install
popd
pushd expat/
./configure --prefix=/usr \
--disable-static \
--docdir=/usr/share/doc/expat-2.6.4
make
make check
make install
install -v -m644 doc/*.{html,css} /usr/share/doc/expat-2.6.4
popd
pushd inetutils/
sed -i 's/def HAVE_TERMCAP_TGETENT/ 1/' telnet/telnet.c
./configure --prefix=/usr \
--bindir=/usr/bin \
--localstatedir=/var \
--disable-logger \
--disable-whois \
--disable-rcp \
--disable-rexec \
--disable-rlogin \
--disable-rsh \
--disable-servers
make
make check
make install
mv -v /usr/{,s}bin/ifconfig
popd
pushd less/
./configure --prefix=/usr --sysconfdir=/etc
make
make check
make install
popd
pushd perl/
export BUILD_ZLIB=False
export BUILD_BZIP2=0
sh Configure -des \
-D prefix=/usr \
-D vendorprefix=/usr \
-D privlib=/usr/lib/perl5/5.40/core_perl \
-D archlib=/usr/lib/perl5/5.40/core_perl \
-D sitelib=/usr/lib/perl5/5.40/site_perl \
-D sitearch=/usr/lib/perl5/5.40/site_perl \
-D vendorlib=/usr/lib/perl5/5.40/vendor_perl \
-D vendorarch=/usr/lib/perl5/5.40/vendor_perl \
-D man1dir=/usr/share/man/man1 \
-D man3dir=/usr/share/man/man3 \
-D pager="/usr/bin/less -isR" \
-D useshrplib \
-D usethreads
make
make install
eic.system.build.continue.perl.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? (~3 SBUs) [R/S/Q]: " OPT
case "$OPT" in
R)
TEST_JOBS=$(nproc) make test_harness > /eilogs/8.43-perl-test.log
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.continue.perl.ask
;;
esac
}
eic.system.build.continue.perl.ask
make install
unset BUILD_ZLIB BUILD_BZIP2
popd
pushd XML-Parser/
perl Makefile.PL
make
make test
make install
popd
pushd intltool/
sed -i 's:\\\${:\\\$\\{:' intltool-update.in
./configure --prefix=/usr
make
make check
make install
install -v -Dm644 doc/I18N-HOWTO /usr/share/doc/intltool-0.51.0/I18N-HOWTO
popd
pushd autoconf/
./configure --prefix=/usr
make
eic.system.build.continue.autoconf.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? (~3 SBUs) [R/S/Q]: " OPT
case "$OPT" in
R)
make check > /eilogs/8.46-autoconf-test.log
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.continue.autoconf.ask
;;
esac
}
eic.system.build.continue.autoconf.ask
make install
popd
pushd automake/
./configure --prefix=/usr --docdir=/usr/share/doc/automake-1.17
make
eic.system.build.continue.automake.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? (~3 SBUs) [R/S/Q]: " OPT
case "$OPT" in
R)
make -j$(($(nproc)>4?$(nproc):4)) check > /eilogs/8.47-automake-test.log
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.continue.automake.ask
;;
esac
}
eic.system.build.continue.automake.ask
make install
popd
pushd openssl/
./config --prefix=/usr \
--openssldir=/etc/ssl \
--libdir=lib \
shared \
zlib-dynamic
make
HARNESS_JOBS=$(nproc) make test > /eilogs/8.48-openssl-test.log
sed -i '/INSTALL_LIBS/s/libcrypto.a libssl.a//' Makefile
make MANSUFFIX=ssl install
mv -v /usr/share/doc/openssl /usr/share/doc/openssl-3.3.1
cp -vfr doc/* /usr/share/doc/openssl-3.3.1
popd
pushd kmod
./configure --prefix=/usr \
--sysconfdir=/etc \
--with-openssl \
--with-xz \
--with-zstd \
--with-zlib \
--disable-manpages
make
make install
for target in depmod insmod modinfo modprobe rmmod; do
ln -sfv ../bin/kmod /usr/sbin/$target
rm -fv /usr/bin/$target
done
popd
pushd elfutils/
./configure --prefix=/usr \
--disable-debuginfod \
--enable-libdebuginfod=dummy
make
make check
make -C libelf install
install -vm644 config/libelf.pc /usr/lib/pkgconfig
rm /usr/lib/libelf.a
popd
pushd libffi/
./configure --prefix=/usr \
--disable-static \
--with-gcc-arch=native
make
make check
make install
popd
pushd python/
./configure --prefix=/usr \
--enable-shared \
--with-system-expat \
--enable-optimizations
make
eic.system.build.continue.python.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? (~3 SBUs) [R/S/Q]: " OPT
case "$OPT" in
R)
make test TESTOPTS="--timeout 120" > /eilogs/8.52-python-test.log
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.continue.python.ask
;;
esac
}
eic.system.build.continue.python.ask
make install
cat > /etc/pip.conf << EOF
[global]
root-user-action = ignore
disable-pip-version-check = true
EOF
install -v -dm755 /usr/share/doc/python-3.12.5/html
tar --no-same-owner \
-xvf ../python-3.12.5-docs-html.tar.bz2
cp -R --no-preserve=mode python-3.12.5-docs-html/* \
/usr/share/doc/python-3.12.5/html
popd
pushd flit_core/
pip3 wheel -w dist --no-cache-dir --no-build-isolation --no-deps $PWD
pip3 install --no-index --no-user --find-links dist flit_core
popd
pushd wheel/
pip3 wheel -w dist --no-cache-dir --no-build-isolation --no-deps $PWD
pip3 install --no-index --find-links=dist wheel
popd
pushd setuptools/
pip3 wheel -w dist --no-cache-dir --no-build-isolation --no-deps $PWD
pip3 install --no-index --find-links dist setuptools
popd
pushd ninja/
export NINJAJOBS=4
sed -i '/int Guess/a \
int j = 0;\
char* jobs = getenv( "NINJAJOBS" );\
if ( jobs != NULL ) j = atoi( jobs );\
if ( j > 0 ) return j;\
' src/ninja.cc
python3 configure.py --bootstrap
install -vm755 ninja /usr/bin/
install -vDm644 misc/bash-completion /usr/share/bash-completion/completions/ninja
install -vDm644 misc/zsh-completion /usr/share/zsh/site-functions/_ninja
popd
pushd meson/
pip3 wheel -w dist --no-cache-dir --no-build-isolation --no-deps $PWD
pip3 install --no-index --find-links dist meson
install -vDm644 data/shell-completions/bash/meson /usr/share/bash-completion/completions/meson
install -vDm644 data/shell-completions/zsh/_meson /usr/share/zsh/site-functions/_meson
popd
pushd coreutils/
patch -Np1 -i ../coreutils-9.5-i18n-2.patch
autoreconf -fiv
FORCE_UNSAFE_CONFIGURE=1 ./configure \
--prefix=/usr \
--enable-no-install-program=kill,uptime
make
make install
mv -v /usr/bin/chroot /usr/sbin
mv -v /usr/share/man/man1/chroot.1 /usr/share/man/man8/chroot.8
sed -i 's/"1"/"8"/' /usr/share/man/man8/chroot.8
popd
pushd check/
./configure --prefix=/usr --disable-static
make
make docdir=/usr/share/doc/check-0.15.2 install
popd
pushd diffutils/
./configure --prefix=/usr
make
make install
popd
pushd gawk/
sed -i 's/extras//' Makefile.in
./configure --prefix=/usr
rm -f /usr/bin/gawk-5.3.0
make install
ln -sv gawk.1 /usr/share/man/man1/awk.1
mkdir -pv /usr/share/doc/gawk-5.3.0
cp -v doc/{awkforai.txt,*.{eps,pdf,jpg}} /usr/share/doc/gawk-5.3.0
popd
pushd findutils/
./configure --prefix=/usr --localstatedir=/var/lib/locate
make
make install
popd
pushd groff/
PAGE=A4 ./configure --prefix=/usr # European standard
make
make install
popd
pushd grub/
unset {C,CPP,CXX,LD}FLAGS
echo depends bli part_gpt > grub-core/extra_deps.lst
./configure --prefix=/usr \
--sysconfdir=/etc \
--disable-efiemu \
--disable-werror
make
make install
mv -v /etc/bash_completion.d/grub /usr/share/bash-completion/completions
popd
pushd gzip/
./configure --prefix=/usr
make
make install
popd
pushd iproute/
sed -i /ARPD/d Makefile
rm -fv man/man8/arpd.8
make NETNS_RUN_DIR=/run/netns
make SBINDIR=/usr/sbin install
mkdir -pv /usr/share/doc/iproute2-6.10.0
cp -v COPYING README* /usr/share/doc/iproute2-6.10.0
popd
pushd kbd/
patch -Np1 -i ../kbd-2.6.4-backspace-1.patch
sed -i '/RESIZECONS_PROGS=/s/yes/no/' configure
sed -i 's/resizecons.8 //' docs/man/man8/Makefile.in
./configure --prefix=/usr --disable-vlock
make
make check
make install
cp -R -v docs/doc -T /usr/share/doc/kbd-2.6.4
popd
pushd libpipeline/
./configure --prefix=/usr
make
make check
make install
popd
pushd make/
./configure --prefix=/usr
make
eic.system.build.continue.make.ask() {
read -p "Pending step: Running test suite. Run, skip or quit? (~3 SBUs) [R/S/Q]: " OPT
case "$OPT" in
R)
chown -R tester .
su tester -c "PATH=$PATH make check" > /eilogs/8.69-make-test.log
;;
S)
echo "Step skipped."
;;
Q)
exit
;;
*)
echo "Unknown command. Repeating questions."
eic.system.build.continue.make.ask
;;
esac
}
eic.system.build.continue.make.ask
make install
popd
pushd patch/
./configure --prefix=/usr
make
make check
make install
popd
pushd tar/
FORCE_UNSAFE_CONFIGURE=1 \
./configure --prefix=/usr
make
make install
make -C doc install-html docdir=/usr/share/doc/tar-1.35
popd
pushd texinfo/
./configure --prefix=/usr
make
make check
make install
make TEXMF=/usr/share/texmf install-tex
popd
pushd nano/
./configure --prefix=/usr \
--sysconfdir=/etc \
--enable-utf8 \
--docdir=/usr/share/doc/nano-8.1
make
make install
install -v -m644 doc/{nano.html,sample.nanorc} /usr/share/doc/nano-8.1
popd
pushd MarkupSafe/
pip3 wheel -w dist --no-cache-dir --no-build-isolation --no-deps $PWD
pip3 install --no-index --no-user --find-links dist Markupsafe
popd
pushd jinja/
pip3 wheel -w dist --no-cache-dir --no-build-isolation --no-deps $PWD
pip3 install --no-index --no-user --find-links dist Jinja2
popd
pushd systemd/
sed -i -e 's/GROUP="render"/GROUP="video"/' \
-e 's/GROUP="sgx", //' rules.d/50-udev-default.rules.in
mkdir -p build
cd build
meson setup .. \
--prefix=/usr \
--buildtype=release \
-D default-dnssec=no \
-D firstboot=false \
-D install-tests=false \
-D ldconfig=false \
-D sysusers=false \
-D rpmmacrosdir=no \
-D homed=disabled \
-D userdb=false \
-D man=disabled \
-D mode=release \
-D pamconfdir=no \
-D dev-kvm-mode=0660 \
-D nobody-group=nogroup \
-D sysupdate=disabled \
-D ukify=disabled \
-D docdir=/usr/share/doc/systemd-256.4
ninja
echo 'NAME="TylkoLinux"' > /etc/os-release
ninja test
ninja install
tar -xf ../../systemd-man-pages-256.4.tar.xz \
--no-same-owner --strip-components=1 \
-C /usr/share/man
systemd-machine-id-setup
systemctl preset-all
popd
pushd dbus/
./configure --prefix=/usr \
--sysconfdir=/etc \
--localstatedir=/var \
--runstatedir=/run \
--enable-user-session \
--disable-static \
--disable-doxygen-docs \
--disable-xml-docs \
--docdir=/usr/share/doc/dbus-1.14.10 \
--with-system-socket=/run/dbus/system_bus_socket
make
make check
make install
ln -sfv /etc/machine-id /var/lib/dbus
popd
pushd man-db/
./configure --prefix=/usr \
--docdir=/usr/share/doc/man-db-2.12.1 \
--sysconfdir=/etc \
--disable-setuid \
--enable-cache-owner=bin \
--with-browser=/usr/bin/lynx \
--with-vgrind=/usr/bin/vgrind \
--with-grap=/usr/bin/grap
make
make check
make install
popd
pushd procps-ng/
./configure --prefix=/usr \
--docdir=/usr/share/doc/procps-ng-4.0.4 \
--disable-static \
--disable-kill \
--with-systemd
make src_w_LDADD='$(LDADD) -lsystemd'
chown -R tester .
su tester -c "PATH=$PATH make check"
make install
popd
pushd util-linux/
./configure --bindir=/usr/bin \
--libdir=/usr/lib \
--runstatedir=/run \
--sbindir=/usr/sbin \
--disable-chfn-chsh \
--disable-login \
--disable-nologin \
--disable-su \
--disable-setpriv \
--disable-runuser \
--disable-pylibmount \
--disable-liblastlog2 \
--disable-static \
--without-python \
ADJTIME_PATH=/var/lib/hwclock/adjtime \
--docdir=/usr/share/doc/util-linux-2.40.2
make
make install
popd
pushd e2fsprogs/
mkdir -v build
cd build
../configure --prefix=/usr \
--sysconfdir=/etc \
--enable-elf-shlibs \
--disable-libblkid \
--disable-libuuid \
--disable-uuidd \
--disable-fsck
make
make check
make install
rm -fv /usr/lib/{libcom_err,libe2p,libext2fs,libss}.a
gunzip -v /usr/share/info/libext2fs.info.gz
install-info --dir-file=/usr/share/info/dir /usr/share/info/libext2fs.info
makeinfo -o doc/com_err.info ../lib/et/com_err.texinfo
install -v -m644 doc/com_err.info /usr/share/info
install-info --dir-file=/usr/share/info/dir /usr/share/info/com_err.info
popd
pushd curl/
./configure --prefix=/usr \
--disable-static \
--with-openssl \
--enable-threaded-resolver \
--with-ca-path=/etc/ssl/certs \
--without-libpsl
make
make install &&
rm -rf docs/examples/.deps &&
find docs \( -name Makefile\* -o \
-name \*.1 -o \
-name \*.3 -o \
-name CMakeLists.txt \) -delete &&
cp -v -R docs -T /usr/share/doc/curl-8.9.1
popd
pushd git/
./configure --prefix=/usr \
--with-gitconfig=/etc/gitconfig \
--with-python=python3 &&
make
make perllibdir=/usr/lib/perl5/5.40/site_perl install
## Prone to certificate errors
tar -xvf ../git-manpages-2.48.1.tar.xz \
-C /usr/share/man --no-same-owner --no-overwrite-dir
mkdir -vp /usr/share/doc/git-2.48.1 &&
tar -xvf ../git-htmldocs-2.48.1.tar.xz \
-C /usr/share/doc/git-2.48.1 --no-same-owner --no-overwrite-dir &&
find /usr/share/doc/git-2.48.1 -type d -exec chmod 755 {} \; &&
find /usr/share/doc/git-2.48.1 -type f -exec chmod 644 {} \;
mkdir -vp /usr/share/doc/git-2.48.1/man-pages/{html,text} &&
mv /usr/share/doc/git-2.48.1/{git*.txt,man-pages/text} &&
mv /usr/share/doc/git-2.48.1/{git*.,index.,man-pages/}html &&
mkdir -vp /usr/share/doc/git-2.48.1/technical/{html,text} &&
mv /usr/share/doc/git-2.48.1/technical/{*.txt,text} &&
mv /usr/share/doc/git-2.48.1/technical/{*.,}html &&
mkdir -vp /usr/share/doc/git-2.48.1/howto/{html,text} &&
mv /usr/share/doc/git-2.48.1/howto/{*.txt,text} &&
mv /usr/share/doc/git-2.48.1/howto/{*.,}html &&
sed -i '/^<a href=/s|howto/|&html/|' /usr/share/doc/git-2.48.1/howto-index.html &&
sed -i '/^\* link:/s|howto/|&html/|' /usr/share/doc/git-2.48.1/howto-index.txt
popd
pushd wget/
./configure --prefix=/usr \
--sysconfdir=/etc \
--with-ssl=openssl &&
make
make install
popd
pushd libtasn1/
./configure --prefix=/usr --disable-static &&
make
make install
popd
pushd p11-kit/
sed '20,$ d' -i trust/trust-extract-compat &&
cat >> trust/trust-extract-compat << "EOF"
# Copy existing anchor modifications to /etc/ssl/local
/usr/libexec/make-ca/copy-trust-modifications
# Update trust stores
/usr/sbin/make-ca -r
EOF
mkdir p11-build &&
cd p11-build &&
meson setup .. \
--prefix=/usr \
--buildtype=release \
-D trust_paths=/etc/pki/anchors &&
ninja
ninja install &&
ln -sfv /usr/libexec/p11-kit/trust-extract-compat \
/usr/bin/update-ca-certificates
ln -sfv ./pkcs11/p11-kit-trust.so /usr/lib/libnssckbi.so
popd
pushd make-ca/
make install &&
install -vdm755 /etc/ssl/local
/usr/sbin/make-ca -g
wget http://www.cacert.org/certs/root.crt &&
wget http://www.cacert.org/certs/class3.crt &&
openssl x509 -in root.crt -text -fingerprint -setalias "CAcert Class 1 root" \
-addtrust serverAuth -addtrust emailProtection -addtrust codeSigning \
> /etc/ssl/local/CAcert_Class_1_root.pem &&
openssl x509 -in class3.crt -text -fingerprint -setalias "CAcert Class 3 root" \
-addtrust serverAuth -addtrust emailProtection -addtrust codeSigning \
> /etc/ssl/local/CAcert_Class_3_root.pem &&
/usr/sbin/make-ca -r
popd
pushd cpio/
./configure --prefix=/usr \
--enable-mt \
--with-rmt=/usr/libexec/rmt &&
make &&
makeinfo --html -o doc/html doc/cpio.texi &&
makeinfo --html --no-split -o doc/cpio.html doc/cpio.texi &&
makeinfo --plaintext -o doc/cpio.txt doc/cpio.texi
make install &&
install -v -m755 -d /usr/share/doc/cpio-2.15/html &&
install -v -m644 doc/html/* \
/usr/share/doc/cpio-2.15/html &&
install -v -m644 doc/cpio.{html,txt} \
/usr/share/doc/cpio-2.15
popd
pushd hwdata/
./configure --prefix=/usr --disable-blacklist
make install
popd
pushd pciutils/
sed -r '/INSTALL/{/PCI_IDS|update-pciids /d; s/update-pciids.8//}' \
-i Makefile
make PREFIX=/usr \
SHAREDIR=/usr/share/hwdata \
SHARED=yes
make PREFIX=/usr \
SHAREDIR=/usr/share/hwdata \
SHARED=yes \
install install-lib &&
chmod -v 755 /usr/lib/libpci.so
popd
pushd libgpg-error/
./configure --prefix=/usr &&
make
make install &&
install -v -m644 -D README /usr/share/doc/libgpg-error-1.50/README
popd
pushd libassaun/
./configure --prefix=/usr &&
make &&
make -C doc html &&
makeinfo --html --no-split -o doc/assuan_nochunks.html doc/assuan.texi &&
makeinfo --plaintext -o doc/assuan.txt doc/assuan.texi
make install &&
install -v -dm755 /usr/share/doc/libassuan-3.0.1/html &&
install -v -m644 doc/assuan.html/* \
/usr/share/doc/libassuan-3.0.1/html &&
install -v -m644 doc/assuan_nochunks.html \
/usr/share/doc/libassuan-3.0.1 &&
install -v -m644 doc/assuan.{txt,texi} \
/usr/share/doc/libassuan-3.0.1
popd
pushd gpgme/
mkdir build &&
cd build &&
../configure --prefix=/usr --disable-gpg-test &&
make PYTHONS=
make install PYTHONS=
popd
cat > /usr/bin/which << "EOF"
#!/bin/bash
type -pa "$@" | head -n 1 ; exit ${PIPESTATUS[0]}
EOF
chmod -v 755 /usr/bin/which
chown -v root:root /usr/bin/which
popd
echo "[i] The system build has successfully finished."
}
function eic.strip() {
save_usrlib="$(cd /usr/lib; ls ld-linux*[^g])
libc.so.6
libthread_db.so.1
libquadmath.so.0.0.0
libstdc++.so.6.0.33
libitm.so.1.0.0
libatomic.so.1.2.0"
cd /usr/lib
for LIB in $save_usrlib; do
objcopy --only-keep-debug --compress-debug-sections=zlib $LIB $LIB.dbg
cp $LIB /tmp/$LIB
strip --strip-unneeded /tmp/$LIB
objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB
install -vm755 /tmp/$LIB /usr/lib
rm /tmp/$LIB
done
online_usrbin="bash find strip"
online_usrlib="libbfd-2.43.1.so
libsframe.so.1.0.0
libhistory.so.8.2
libncursesw.so.6.5
libm.so.6
libreadline.so.8.2
libz.so.1.3.1
libzstd.so.1.5.6
$(cd /usr/lib; find libnss*.so* -type f)"
for BIN in $online_usrbin; do
cp /usr/bin/$BIN /tmp/$BIN
strip --strip-unneeded /tmp/$BIN
install -vm755 /tmp/$BIN /usr/bin
rm /tmp/$BIN
done
for LIB in $online_usrlib; do
cp /usr/lib/$LIB /tmp/$LIB
strip --strip-unneeded /tmp/$LIB
install -vm755 /tmp/$LIB /usr/lib
rm /tmp/$LIB
done
for i in $(find /usr/lib -type f -name \*.so* ! -name \*dbg) \
$(find /usr/lib -type f -name \*.a) \
$(find /usr/{bin,sbin,libexec} -type f); do
case "$online_usrbin $online_usrlib $save_usrlib" in
*$(basename $i)* )
;;
* ) strip --strip-unneeded $i
;;
esac
done
unset BIN LIB save_usrlib online_usrbin online_usrlib
}
function eic.system.build.clean() {
rm -rfv /tmp/{*,.*}
find /usr/lib /usr/libexec -name \*.la -delete
find /usr -depth -name $(uname -m)-lfs-linux-gnu\* | xargs rm -rf
userdel -r tester
}
function eic.config.network.devicenaming() {
ln -s /dev/null /etc/systemd/network/99-default.link
read -p "[i] Enter MAC address of desired device: " OPT_MAC
read -p "[i] Enter the desired name of your interface: " OPT_NET_INT
echo -e "[Match]
# Change the MAC address as appropriate for your network device
MACAddress=${OPT_MAC}
[Link]
Name=${OPT_NET_INT}" > /etc/systemd/network/10-ether0.link
}
function eic.config.network.staticip() {
read -p "[i] Enter the name of the configured interface: " OPT_NET_INT
echo -e "[Match]
Name=${OPT_NET_INT}
[Network]
Address=192.168.0.2/24
Gateway=192.168.0.1" > /etc/systemd/network/10-eth-static.network
echo "[?] Add DNS? If no, type N. If yes, type DNS address."
read -p "> " OPT_NET_DNS
case "$OPT_NET_DNS" in
N|n|No|no|nO|NO)
echo "[i] Skipped DNS addition."
;;
*)
echo -e "DNS=${OPT_NET_DNS}" >> /etc/systemd/network/10-eth-static.network
;;
esac
echo "[?] Add domain? If no, type N. If yes, type domain name."
read -p "> " OPT_NET_DOMAIN
case "$OPT_NET_DOMAIN" in
N|n|No|no|nO|NO)
echo "[i] Skipped domain addition."
;;
*)
echo -e "Domains=${OPT_NET_DOMAIN}" >> /etc/systemd/network/10-eth-static.network
;;
esac
}
function eic.config.network.dhcp() {
read -p "[i] Enter the name of the configured interface: " OPT_NET_INT
echo -e "
[Match]
Name=${OPT_NET_INT}
[Network]
DHCP=ipv4
[DHCPv4]
UseDomains=true" > /etc/systemd/network/10-eth-dhcp.network
}
function eic.config.network.systemd.resolve() {
case "$@" in
on|enable)
echo "[i] Enabling systemd-resolved..."
systemctl enable systemd-resolved
;;
off|disable)
echo "[i] Disabling systemd-resolved..."
systemctl disable systemd-resolved
;;
*)
echo "[!] Unrecognised (or empty) argument."
echo "[i] Syntax: eic.config.network.systemd.resolve (on/off/enable/disable)"
;;
esac
}
function eic.config.network.staticresolver() {
echo "[?] Add domain? If no, type N. If yes, type domain name."
read -p "> " OPT_NET_DOMAIN
case "$OPT_NET_DOMAIN" in
N|n|No|no|nO|NO)
echo "[i] Skipped domain addition."
;;
*)
echo -e "domain ${OPT_NET_DOMAIN}" >> /etc/resolv.conf
;;
esac
echo "[?] Add primary nameserver? If no, type N. If yes, type nameserver name."
read -p "> " OPT_NET_NS1
case "$OPT_NET_NS1" in
N|n|No|no|nO|NO)
echo "[i] Skipped primary nameserver addition."
;;
*)
echo -e "nameserver ${OPT_NET_NS1}" >> /etc/resolv.conf
;;
esac
echo "[?] Add secondary nameserver? If no, type N. If yes, type nameserver name."
read -p "> " OPT_NET_NS2
case "$OPT_NET_NS2" in
N|n|No|no|nO|NO)
echo "[i] Skipped secondary nameserver addition."
;;
*)
echo -e "nameserver ${OPT_NET_NS2}" >> /etc/resolv.conf
;;
esac
# echo -e "
## Begin /etc/resolv.conf
#
#domain ${OPT_NET_DOMAIN}
#nameserver ${OPT_NET_NS1}
#nameserver ${OPT_NET_NS2}
## End /etc/resolv.conf
#" > /etc/resolv.conf
}
function eic.config.network.hostname() {
echo "$@" > /etc/hostname
}
function eic.config.time.createAdj() {
cat > /etc/adjtime << "EOF"
0.0 0 0.0
0
LOCAL
EOF
echo "[i] Adjusted /etc/adjtime according to LFS instructions."
}
function eic.config.time.clarifyUTC() {
timedatectl set-local-rtc 1
}
function eic.config.time.set() {
read -p "[i] Enter year in 4 digits (no spaces): " YEAR
read -p "[i] Enter month number in 2 digits (no spaces): " MONTH
read -p "[i] Enter day number in 2 digits (no spaces): " DAY
read -p "[i] Enter hour in 2 digits (no spaces) (24-hour format): " HOUR
read -p "[i] Enter minute in 2 digits (no spaces): " MINUTE
read -p "[i] Enter second in 2 digits (no spaces): " SECOND
timedatectl set-time $YEAR-$MONTH-$DAY $HOUR:$MINUTE:$SECOND
}
function eic.config.time.tz() {
timedatectl set-timezone "$@"
}
function eic.config.time.nts() {
case "$@" in
on|enable)
echo "[i] Enabling Network Time Synchronisation..."
systemctl enable systemd-timesyncd
;;
off|disable)
echo "[i] Disabling Network Time Synchronisation..."
systemctl disable systemd-timesyncd
;;
*)
echo "[!] Unrecognised (or empty) argument."
echo "[i] Syntax: eic.config.time.nts (on/off/enable/disable)"
;;
esac
}
function eic.config.console.preset() {
echo FONT=Lat2-Terminus16 > /etc/vconsole.conf
}
function eic.config.console.keymap() {
echo "KEYMAP=$1" >> /etc/vconsole.conf
}
function eic.config.locale.set() {
read -p "[i] Enter language code (for example de): " LANGUAGE
read -p "[i] Enter country code (for example CH): " COUNTRY
read -p "[i] Enter character map code (for example UTF-8): " CHARACTERMAP
read -p "[i] Enter modifiers, leave empty if none (needs to start with @): " MODIFIERS
echo -e "LANG=${LANGUAGE}_${COUNTRY}.${CHARACTERMAP}${MODIFIERS}" > /etc/locale.conf
cat > /etc/profile << "EOF"
# Begin /etc/profile
for i in $(locale); do
unset ${i%=*}
done
if [[ "$TERM" = linux ]]; then
export LANG=C.UTF-8
else
source /etc/locale.conf
for i in $(locale); do
key=${i%=*}
if [[ -v $key ]]; then
export $key
fi
done
fi
# End /etc/profile
EOF
}
function eic.config.create.inputrc() {
cat > /etc/inputrc << "EOF"
# Begin /etc/inputrc
# Modified by Chris Lynn <roryo@roryo.dynup.net>
# Allow the command prompt to wrap to the next line
set horizontal-scroll-mode Off
# Enable 8-bit input
set meta-flag On
set input-meta On
# Turns off 8th bit stripping
set convert-meta Off
# Keep the 8th bit for display
set output-meta On
# none, visible or audible
set bell-style none
# All of the following map the escape sequence of the value
# contained in the 1st argument to the readline specific functions
"\eOd": backward-word
"\eOc": forward-word
# for linux console
"\e[1~": beginning-of-line
"\e[4~": end-of-line
"\e[5~": beginning-of-history
"\e[6~": end-of-history
"\e[3~": delete-char
"\e[2~": quoted-insert
# for xterm
"\eOH": beginning-of-line
"\eOF": end-of-line
# for Konsole
"\e[H": beginning-of-line
"\e[F": end-of-line
# End /etc/inputrc
EOF
}
function eic.config.create.shells() {
cat > /etc/shells << "EOF"
# Begin /etc/shells
/bin/sh
/bin/bash
# End /etc/shells
EOF
}
function eic.config.systemd.disableScreenClearing() {
case "$@" in
yes|YES|Yes)
mkdir -pv /etc/systemd/system/getty@tty1.service.d
cat > /etc/systemd/system/getty@tty1.service.d/noclear.conf << EOF
[Service]
TTYVTDisallocate=no
EOF
;;
no|NO|No)
rm /etc/systemd/system/getty@tty1.service.d/noclear.conf
;;
*)
echo "[!] Unrecognised (or empty) argument."
echo "[i] Syntax: eic.config.systemd.disableScreenClearing (yes/no)"
;;
esac
}
function eic.config.systemd.limitCoreDumpSize() {
mkdir -pv /etc/systemd/coredump.conf.d || echo "[i] Great, the directory already exists!"
echo -e "[Coredump]
MaxUse=$1" > /etc/systemd/coredump.conf.d/maxuse.conf
}
function eic.linux.install() {
pushd /sources/linux/
read -p "[i] In this section, it is recommended to have the TylkoLinux build/installation guide open and ready. [ENTER]: "
make mrproper
# make menuconfig
make
make modules_install
read -p "[i] Mount boot partition? [Y/N]: " OPT
case $OPT in
Y|y|Yes|yes|YES)
mount /boot
;;
*)
echo "[i] Skipped mount."
;;
esac
cp -iv arch/x86/boot/bzImage /boot/vmlinuz-6.10.5-lfs-12.2-systemd
cp -iv System.map /boot/System.map-6.10.5
cp -iv .config /boot/config-6.10.5
cp -r Documentation -T /usr/share/doc/linux-6.10.5
install -v -m755 -d /etc/modprobe.d
cat > /etc/modprobe.d/usb.conf << "EOF"
# Begin /etc/modprobe.d/usb.conf
install ohci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe -i ohci_hcd ; true
install uhci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe -i uhci_hcd ; true
# End /etc/modprobe.d/usb.conf
EOF
popd
}
function eic.plus() {
pushd /sources/
tar -xvf NetworkManager-1.48.8.tar.xz
mv NetworkManager-1.48.8 NetworkManager
tar -xvf polkit-125.tar.gz
mv polkit-125 polkit
tar -xvf glib-2.80.4.tar.xz
mv glib-2.80.4 glib
tar -xvf packaging-24.1.tar.gz
mv packaging-24.1 packaging
tar -xvf newt-0.52.24.tar.gz
mv newt-0.52.24 newt
tar -xvf slang-2.3.3.tar.bz2
mv slang-2.3.3 slang
tar -xvf gpm-1.20.7.tar.bz2
mv gpm-1.20.7 gpm
tar -xvf icu4c-76_1-src.tgz
tar -xvf libxml2-2.13.5.tar.xz
mv libxml2-2.13.5 libxml2
tar -xvf libxslt-1.1.42.tar.xz
mv libxslt-1.1.42 libxslt
pushd icu/
cd source &&
./configure --prefix=/usr &&
make
make install
popd
pushd libxml2/
./configure --prefix=/usr \
--sysconfdir=/etc \
--disable-static \
--with-history \
--with-icu \
PYTHON=/usr/bin/python3 \
--docdir=/usr/share/doc/libxml2-2.13.5 &&
make
make install
rm -vf /usr/lib/libxml2.la &&
sed '/libs=/s/xml2.*/xml2"/' -i /usr/bin/xml2-config
popd
pushd libxslt/
./configure --prefix=/usr \
--disable-static \
--docdir=/usr/share/doc/libxslt-1.1.42 &&
make
make install
popd
pushd gpm/
patch -Np1 -i ../gpm-1.20.7-consolidated-1.patch &&
./autogen.sh &&
./configure --prefix=/usr --sysconfdir=/etc ac_cv_path_emacs=no &&
make
make install &&
install-info --dir-file=/usr/share/info/dir \
/usr/share/info/gpm.info &&
rm -fv /usr/lib/libgpm.a &&
ln -sfv libgpm.so.2.1.0 /usr/lib/libgpm.so &&
install -v -m644 conf/gpm-root.conf /etc &&
install -v -m755 -d /usr/share/doc/gpm-1.20.7/support &&
install -v -m644 doc/support/* \
/usr/share/doc/gpm-1.20.7/support &&
install -v -m644 doc/{FAQ,HACK_GPM,README*} \
/usr/share/doc/gpm-1.20.7
popd
pushd slang/
./configure --prefix=/usr \
--sysconfdir=/etc \
--with-readline=gnu &&
make -j1 RPATH=
make install_doc_dir=/usr/share/doc/slang-2.3.3 \
SLSH_DOC_DIR=/usr/share/doc/slang-2.3.3/slsh \
RPATH= install
popd
if [ -d "/sources/popt" ]; then
echo "[i] popt has already been extracted, it seems.";
else
tar -xvf popt-*.tar.gz
mv popt-1.19 popt
fi
pushd popt/
./configure --prefix=/usr --disable-static &&
make
make install
popd
pushd newt/
sed -e '/install -m 644 $(LIBNEWT)/ s/^/#/' \
-e '/$(LIBNEWT):/,/rv/ s/^/#/' \
-e 's/$(LIBNEWT)/$(LIBNEWTSH)/g' \
-i Makefile.in &&
./configure --prefix=/usr \
--with-gpm-support \
--with-python=python3.12 &&
make
make install
popd
pushd packaging/
pip3 wheel -w dist --no-build-isolation --no-deps --no-cache-dir $PWD
pip3 install --no-index --find-links=dist --no-cache-dir --no-user packaging
popd
pushd glib/
patch -Np1 -i ../glib-skip_warnings-1.patch
if [ -e /usr/include/glib-2.0 ]; then
rm -rf /usr/include/glib-2.0.old &&
mv -vf /usr/include/glib-2.0{,.old}
fi
mkdir build
cd build &&
meson setup .. \
--prefix=/usr \
--buildtype=release \
-D introspection=disabled #\
# -D man-pages=enabled
ninja
ninja install
tar xf ../../gobject-introspection-1.80.1.tar.xz &&
meson setup gobject-introspection-1.80.1 gi-build \
--prefix=/usr --buildtype=release &&
ninja -C gi-build
ninja -C gi-build install
meson configure -D introspection=enabled &&
ninja
ninja install
popd
tar -xvf duktape-2.7.0.tar.xz
mv duktape-2.7.0 duktape
pushd duktape/
sed -i 's/-Os/-O2/' Makefile.sharedlibrary
make -f Makefile.sharedlibrary INSTALL_PREFIX=/usr
make -f Makefile.sharedlibrary INSTALL_PREFIX=/usr install
popd
tar -xvf Linux-PAM-1.6.1.tar.xz
mv Linux-PAM-1.6.1 Linux-PAM
pushd Linux-PAM/
autoreconf -fi
tar -xvf ../Linux-PAM-1.6.1-docs.tar.xz --strip-components=1
./configure --prefix=/usr \
--sbindir=/usr/sbin \
--sysconfdir=/etc \
--libdir=/usr/lib \
--enable-securedir=/usr/lib/security \
--docdir=/usr/share/doc/Linux-PAM-1.6.1 &&
make
install -v -m755 -d /etc/pam.d &&
make install &&
chmod -v 4755 /usr/sbin/unix_chkpwd
install -vdm755 /etc/pam.d &&
cat > /etc/pam.d/system-account << "EOF" &&
# Begin /etc/pam.d/system-account
account required pam_unix.so
# End /etc/pam.d/system-account
EOF
cat > /etc/pam.d/system-auth << "EOF" &&
# Begin /etc/pam.d/system-auth
auth required pam_unix.so
# End /etc/pam.d/system-auth
EOF
cat > /etc/pam.d/system-session << "EOF" &&
# Begin /etc/pam.d/system-session
session required pam_unix.so
# End /etc/pam.d/system-session
EOF
cat > /etc/pam.d/system-password << "EOF"
# Begin /etc/pam.d/system-password
# use yescrypt hash for encryption, use shadow, and try to use any
# previously defined authentication token (chosen password) set by any
# prior module.
password required pam_unix.so yescrypt shadow try_first_pass
# End /etc/pam.d/system-password
EOF
cat > /etc/pam.d/other << "EOF"
# Begin /etc/pam.d/other
auth required pam_warn.so
auth required pam_deny.so
account required pam_warn.so
account required pam_deny.so
password required pam_warn.so
password required pam_deny.so
session required pam_warn.so
session required pam_deny.so
# End /etc/pam.d/other
EOF
popd
pushd shadow/
sed -i 's@DICTPATH.*@DICTPATH\t/lib/cracklib/pw_dict@' etc/login.defs
sed -i 's/groups$(EXEEXT) //' src/Makefile.in &&
find man -name Makefile.in -exec sed -i 's/groups\.1 / /' {} \; &&
find man -name Makefile.in -exec sed -i 's/getspnam\.3 / /' {} \; &&
find man -name Makefile.in -exec sed -i 's/passwd\.5 / /' {} \; &&
sed -e 's@#ENCRYPT_METHOD DES@ENCRYPT_METHOD YESCRYPT@' \
-e 's@/var/spool/mail@/var/mail@' \
-e '/PATH=/{s@/sbin:@@;s@/bin:@@}' \
-i etc/login.defs &&
./configure --sysconfdir=/etc \
--disable-static \
--without-libbsd \
--with-{b,yes}crypt &&
make
make exec_prefix=/usr pamddir= install
install -v -m644 /etc/login.defs /etc/login.defs.orig &&
for FUNCTION in FAIL_DELAY \
FAILLOG_ENAB \
LASTLOG_ENAB \
MAIL_CHECK_ENAB \
OBSCURE_CHECKS_ENAB \
PORTTIME_CHECKS_ENAB \
QUOTAS_ENAB \
CONSOLE MOTD_FILE \
FTMP_FILE NOLOGINS_FILE \
ENV_HZ PASS_MIN_LEN \
SU_WHEEL_ONLY \
CRACKLIB_DICTPATH \
PASS_CHANGE_TRIES \
PASS_ALWAYS_WARN \
CHFN_AUTH ENCRYPT_METHOD \
ENVIRON_FILE
do
sed -i "s/^${FUNCTION}/# &/" /etc/login.defs
done
cat > /etc/pam.d/login << "EOF"
# Begin /etc/pam.d/login
# Set failure delay before next prompt to 3 seconds
auth optional pam_faildelay.so delay=3000000
# Check to make sure that the user is allowed to login
auth requisite pam_nologin.so
# Check to make sure that root is allowed to login
# Disabled by default. You will need to create /etc/securetty
# file for this module to function. See man 5 securetty.
#auth required pam_securetty.so
# Additional group memberships - disabled by default
#auth optional pam_group.so
# include system auth settings
auth include system-auth
# check access for the user
account required pam_access.so
# include system account settings
account include system-account
# Set default environment variables for the user
session required pam_env.so
# Set resource limits for the user
session required pam_limits.so
# Display the message of the day - Disabled by default
#session optional pam_motd.so
# Check user's mail - Disabled by default
#session optional pam_mail.so standard quiet
# include system session and password settings
session include system-session
password include system-password
# End /etc/pam.d/login
EOF
cat > /etc/pam.d/passwd << "EOF"
# Begin /etc/pam.d/passwd
password include system-password
# End /etc/pam.d/passwd
EOF
cat > /etc/pam.d/su << "EOF"
# Begin /etc/pam.d/su
# always allow root
auth sufficient pam_rootok.so
# Allow users in the wheel group to execute su without a password
# disabled by default
#auth sufficient pam_wheel.so trust use_uid
# include system auth settings
auth include system-auth
# limit su to users in the wheel group
# disabled by default
#auth required pam_wheel.so use_uid
# include system account settings
account include system-account
# Set default environment variables for the service user
session required pam_env.so
# include system session settings
session include system-session
# End /etc/pam.d/su
EOF
cat > /etc/pam.d/chpasswd << "EOF"
# Begin /etc/pam.d/chpasswd
# always allow root
auth sufficient pam_rootok.so
# include system auth and account settings
auth include system-auth
account include system-account
password include system-password
# End /etc/pam.d/chpasswd
EOF
sed -e s/chpasswd/newusers/ /etc/pam.d/chpasswd >/etc/pam.d/newusers
cat > /etc/pam.d/chage << "EOF"
# Begin /etc/pam.d/chage
# always allow root
auth sufficient pam_rootok.so
# include system auth and account settings
auth include system-auth
account include system-account
# End /etc/pam.d/chage
EOF
for PROGRAM in chfn chgpasswd chsh groupadd groupdel \
groupmems groupmod useradd userdel usermod
do
install -v -m644 /etc/pam.d/chage /etc/pam.d/${PROGRAM}
sed -i "s/chage/$PROGRAM/" /etc/pam.d/${PROGRAM}
done
if [ -f /etc/login.access ]; then mv -v /etc/login.access{,.NOUSE}; fi
if [ -f /etc/limits ]; then mv -v /etc/limits{,.NOUSE}; fi
popd
pushd elfutils/
make -C libdwelf install
make -C libdwfl install
popd
pushd systemd/
sed -i -e 's/GROUP="render"/GROUP="video"/' \
-e 's/GROUP="sgx", //' rules.d/50-udev-default.rules.in
rm -r build
mkdir build &&
cd build &&
meson setup .. \
--prefix=/usr \
--buildtype=release \
-D default-dnssec=no \
-D firstboot=false \
-D install-tests=false \
-D ldconfig=false \
-D man=auto \
-D sysusers=false \
-D rpmmacrosdir=no \
-D homed=disabled \
-D userdb=false \
-D mode=release \
-D pam=enabled \
-D pamconfdir=/etc/pam.d \
-D dev-kvm-mode=0660 \
-D nobody-group=nogroup \
-D sysupdate=disabled \
-D ukify=disabled \
-D docdir=/usr/share/doc/systemd-256.4 &&
ninja
ninja install
grep 'pam_systemd' /etc/pam.d/system-session ||
cat >> /etc/pam.d/system-session << "EOF"
# Begin Systemd addition
session required pam_loginuid.so
session optional pam_systemd.so
# End Systemd addition
EOF
cat > /etc/pam.d/systemd-user << "EOF"
# Begin /etc/pam.d/systemd-user
account required pam_access.so
account include system-account
session required pam_env.so
session required pam_limits.so
session required pam_loginuid.so
session optional pam_keyinit.so force revoke
session optional pam_systemd.so
auth required pam_deny.so
password required pam_deny.so
# End /etc/pam.d/systemd-user
EOF
systemctl daemon-reexec
popd
pushd polkit/
groupadd -fg 27 polkitd &&
useradd -c "PolicyKit Daemon Owner" -d /etc/polkit-1 -u 27 \
-g polkitd -s /bin/false polkitd
mkdir build &&
cd build &&
meson setup .. \
--prefix=/usr \
--buildtype=release \
-D session_tracking=logind
ninja
ninja install
popd
tar -xvf libndp-1.9.tar.gz
mv libndp-1.9 libndp
pushd libndp/
./configure --prefix=/usr \
--sysconfdir=/etc \
--localstatedir=/var \
--disable-static &&
make
make install
popd
read -p "[?] Disable systemd-networkd? [Y/N]: " OPT
case "$OPT" in
y|Y|Yes|yes|YES)
systemctl disable --now systemd-networkd
;;
*)
echo "[i] systemd-networkd will stay enabled."
;;
esac
pushd NetworkManager
sed -i "s/option('libpsl', type: 'boolean', value: true, description: 'Link against libpsl')/option('libpsl', type: 'boolean', value: false, description: 'Link against libpsl')/g" meson_options.txt
grep -rl '^#!.*python$' | xargs sed -i '1s/python/&3/'
CXXFLAGS+="-O2 -fPIC" \
meson setup .. \
--prefix=/usr \
--buildtype=release \
-D libaudit=no \
-D nmtui=true \
-D ovs=false \
-D ppp=false \
-D selinux=false \
-D qt=false \
-D session_tracking=systemd \
-D tests=no \
-D modem_manager=false \
-D crypto=null &&
ninja
ninja install &&
mv -v /usr/share/doc/NetworkManager{,-1.48.8}
for file in $(echo ../man/*.[1578]); do
section=${file##*.} &&
install -vdm 755 /usr/share/man/man$section
install -vm 644 $file /usr/share/man/man$section/
done
cp -Rv ../docs/{api,libnm} /usr/share/doc/NetworkManager-1.48.8
cat >> /etc/NetworkManager/NetworkManager.conf << "EOF"
[main]
plugins=keyfile
EOF
cat > /etc/NetworkManager/conf.d/polkit.conf << "EOF"
[main]
auth-polkit=true
EOF
cat > /etc/NetworkManager/conf.d/no-dns-update.conf << "EOF"
[main]
dns=none
EOF
groupadd -fg 86 netdev &&
/usr/sbin/usermod -a -G netdev root
cat > /usr/share/polkit-1/rules.d/org.freedesktop.NetworkManager.rules << "EOF"
polkit.addRule(function(action, subject) {
if (action.id.indexOf("org.freedesktop.NetworkManager.") == 0 && subject.isInGroup("netdev")) {
return polkit.Result.YES;
}
});
EOF
systemctl enable NetworkManager
systemctl disable NetworkManager-wait-online
popd
popd
}
function eic.rpm.install() {
# Enter /sources/ directory
pushd /sources/
# Extract needed packages for compiling RPM
bunzip2 -v -v rpm-4.18.0.tar.bz2
tar -xvf rpm-4.18.0*.tar
mv rpm-4.18.0 rpm
tar -xvf debugedit*.tar.xz
mv debugedit-0.3 debugedit
tar -xvf lua*.gz
mv lua-5.4.7 lua
tar -xvf popt-*.tar.gz
mv popt-1.19 popt
tar -xvf curl-*.tar.xz
mv curl-8.9.1 curl
tar -xvf libarchive-3.7.4.tar.xz
mv libarchive-3.7.4 libarchive
tar -xvf nghttp2-*.xz
mv nghttp2-1.64.0 nghttp2
tar -xvf libuv-*.gz
mv libuv-v1.50.0 libuv
tar -xvf sqlite-autoconf-3480000.tar.gz
tar -xvf libgcrypt-1.11.0.tar.bz2
tar -xvf libgpg-error-1.50.tar.bz2
mv libgcrypt-1.11.0 libgcrypt
mv libgpg-error-1.50 libgpg-error
pushd libgpg-error/
./configure --prefix=/usr &&
make
make install
install -v -m644 -D README /usr/share/doc/libgpg-error-1.50/README
popd
pushd libgcrypt/
./configure --prefix=/usr &&
make &&
make -C doc html &&
makeinfo --html --no-split -o doc/gcrypt_nochunks.html doc/gcrypt.texi &&
makeinfo --plaintext -o doc/gcrypt.txt doc/gcrypt.texi
make install &&
install -v -dm755 /usr/share/doc/libgcrypt-1.11.0 &&
install -v -m644 README doc/{README.apichanges,fips*,libgcrypt*} \
/usr/share/doc/libgcrypt-1.11.0 &&
install -v -dm755 /usr/share/doc/libgcrypt-1.11.0/html &&
install -v -m644 doc/gcrypt.html/* \
/usr/share/doc/libgcrypt-1.11.0/html &&
install -v -m644 doc/gcrypt_nochunks.html \
/usr/share/doc/libgcrypt-1.11.0 &&
install -v -m644 doc/gcrypt.{txt,texi} \
/usr/share/doc/libgcrypt-1.11.0
popd
pushd libarchive/
./configure --prefix=/usr --disable-static &&
make
make install
popd
pushd nghttp2/
./configure --prefix=/usr \
--disable-static \
--enable-lib-only \
--docdir=/usr/share/doc/nghttp2-1.64.0 &&
make
make install
popd
pushd libuv/
sh autogen.sh &&
./configure --prefix=/usr --disable-static &&
make
make install
popd
pushd debugedit/
./configure --prefix=/usr
make
make install
popd
pushd lua/
cat > lua.pc << "EOF"
V=5.4
R=5.4.7
prefix=/usr
INSTALL_BIN=${prefix}/bin
INSTALL_INC=${prefix}/include
INSTALL_LIB=${prefix}/lib
INSTALL_MAN=${prefix}/share/man/man1
INSTALL_LMOD=${prefix}/share/lua/${V}
INSTALL_CMOD=${prefix}/lib/lua/${V}
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=${prefix}/include
Name: Lua
Description: An Extensible Extension Language
Version: ${R}
Requires:
Libs: -L${libdir} -llua -lm -ldl
Cflags: -I${includedir}
EOF
patch -Np1 -i ../lua-5.4.7-shared_library-1.patch
make linux
make all install
make INSTALL_TOP=/usr \
INSTALL_DATA="cp -d" \
INSTALL_MAN=/usr/share/man/man1 \
TO_LIB="liblua.so liblua.so.5.4 liblua.so.5.4.7" \
install &&
mkdir -pv /usr/share/doc/lua-5.4.7 &&
cp -v doc/*.{html,css,gif,png} /usr/share/doc/lua-5.4.7 &&
install -v -m644 -D lua.pc /usr/lib/pkgconfig/lua.pc
popd
pushd popt/
./configure --prefix=/usr --disable-static
make
make install
popd
pushd /sources/elfutils/
make -C libdw install
install -vm644 config/libdw.pc /usr/lib/pkgconfig
rm /usr/lib/libdw.a
popd
pushd sqlite-autoconf-3480000/
./configure --prefix=/usr \
--disable-static \
--enable-fts{4,5} \
CPPFLAGS="-D SQLITE_ENABLE_COLUMN_METADATA=1 \
-D SQLITE_ENABLE_UNLOCK_NOTIFY=1 \
-D SQLITE_ENABLE_DBSTAT_VTAB=1 \
-D SQLITE_SECURE_DELETE=1" &&
make
make install
popd
pushd /sources/rpm
./autogen.sh --noconfigure
./configure --prefix=/usr --enable-python --enable-plugins --enable-shared --enable-static
make
make install
popd
install -d /var/lock/rpm
rpm --initdb --root=/
pip3 install rpm
mkdir /etc/yum.repos.d
mkdir /sources-rpm/
pushd /sources-rpm/
wget https://repo.rootsource.cc/pub/TylkoLinux/25.2/os/pkgs/t/tylux-release-25.2-25.2.noarch.rpm
rpm -vv -i ./tylux-release-25.2-25.2.noarch.rpm
popd
cat > /etc/yum.repos.d/tylux25d2.repo << 'EOF'
[rscc]
name=TylkoLinux 25.2 updates
baseurl=https://repo.rootsource.cc/pub/TylkoLinux/25.2/os/pkgs/
enabled=1
EOF
popd
}
# I truly hate Zypper. Don't use. I install a dep. It wants another. I install another, BUT IT ALWAYS FUCKING WANTS MORE DEPENDENCIES!!!
function eic.zypper.install.DONOTUSE() {
pushd /sources/
tar -xvf boost-1.86.0-b2-nodocs.tar.xz
mv boost-1.86.0 boost
pushd boost/
patch -Np1 -i ../boost-1.86.0-upstream_fixes-1.patch
case $(uname -m) in
i?86)
sed -e "s/defined(__MINGW32__)/& || defined(__i386__)/" \
-i ./libs/stacktrace/src/exception_headers.h ;;
esac
./bootstrap.sh --prefix=/usr --with-python=python3 &&
./b2 stage $MAKEFLAGS threading=multi link=shared
rm -rf /usr/lib/cmake/[Bb]oost*
./b2 install threading=multi link=shared
popd
mv 1.14.81.tar.gz zypper-1.14.81.tar.gz
tar -xvf zypper-1.14.81.tar.gz
mv zypper-1.14.81 zypper
git clone https://github.com/jbeder/yaml-cpp.git
pushd yaml-cpp/
mkdir build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
make -j$(nproc)
make install
popd
git clone https://github.com/openSUSE/libsolv.git
pushd libsolv/
mkdir build
cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr &&
make
make install
popd
git clone https://github.com/openSUSE/libzypp
pushd libzypp/
git checkout tags/17.35.19
mkdir build
cd build
cmake .. -D CMAKE_INSTALL_PREFIX:PATH=/usr -D ENABLE_BUILD_DOCS:BOOL=OFF -DCMAKE_MODULE_PATH="/usr/share/cmake/Modules/"
# not done
popd
mkdir build
cd build
popd
}
function eic.dnf5.install.DONOTUSE() {
pushd /sources/
echo "Hi"
tar -xvf boost-1.86.0-b2-nodocs.tar.xz
mv boost-1.86.0 boost
pushd boost/
patch -Np1 -i ../boost-1.86.0-upstream_fixes-1.patch
case $(uname -m) in
i?86)
sed -e "s/defined(__MINGW32__)/& || defined(__i386__)/" \
-i ./libs/stacktrace/src/exception_headers.h ;;
esac
./bootstrap.sh --prefix=/usr --with-python=python3 &&
./b2 stage $MAKEFLAGS threading=multi link=shared
rm -rf /usr/lib/cmake/[Bb]oost*
./b2 install threading=multi link=shared
popd
mv 1.14.81.tar.gz zypper-1.14.81.tar.gz
tar -xvf zypper-1.14.81.tar.gz
mv zypper-1.14.81 zypper
git clone https://github.com/jbeder/yaml-cpp.git
pushd yaml-cpp/
mkdir build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
make -j$(nproc)
make install
popd
git clone https://github.com/openSUSE/libsolv.git
pushd libsolv/
mkdir build
cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr &&
make
make install
popd
git clone https://github.com/rpm-software-management/dnf5
git clone https://github.com/ToruNiina/toml11
git clone https://github.com/fmtlib/fmt
git clone https://github.com/json-c/json-c
git clonr https://pagure.io/koji
pushd toml11/
git submodule update --init --recursive
cmake -B ./build/
cmake --build ./build/
cmake --install ./build/ --prefix /usr/
popd
pushd fmt/
cmake .. -DFMT_TEST=OFF
make
cmake --install . --prefix /usr/
popd
pushd json-c/
mkdir json-c-build
cd json-c-build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
make
make install
popd
pushd koji/
pip3 install -r requirements.txt
popd
pushd dnf/
mkdir build
cd build
cmake .. -DWITH_TESTS=OFF -DCMAKE_INSTALL_PREFIX=/usr
popd
popd
}
function eic.dnf4.install.DONOTUSE() {
pushd /sources/
tar -xvf boost-1.86.0-b2-nodocs.tar.xz
mv boost-1.86.0 boost
pushd boost/
patch -Np1 -i ../boost-1.86.0-upstream_fixes-1.patch
case $(uname -m) in
i?86)
sed -e "s/defined(__MINGW32__)/& || defined(__i386__)/" \
-i ./libs/stacktrace/src/exception_headers.h ;;
esac
./bootstrap.sh --prefix=/usr --with-python=python3 &&
./b2 stage $MAKEFLAGS threading=multi link=shared
rm -rf /usr/lib/cmake/[Bb]oost*
./b2 install threading=multi link=shared
popd
mv 1.14.81.tar.gz zypper-1.14.81.tar.gz
tar -xvf zypper-1.14.81.tar.gz
mv zypper-1.14.81 zypper
git clone https://github.com/jbeder/yaml-cpp.git
pushd yaml-cpp/
mkdir build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
make -j$(nproc)
make install
popd
git clone https://github.com/openSUSE/libsolv.git
pushd libsolv/
mkdir build
cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr &&
make
make install
popd
cp -v /usr/share/cmake/Modules/FindLibSolv.cmake /usr/share/cmake-3.31/Modules/FindLibSolv.cmake
git clone https://github.com/rpm-software-management/librepo
git clone https://github.com/rpm-software-management/libdnf
git clone https://github.com/rpm-software-management/dnf
git clone https://github.com/rpm-software-management/modulemd-tools
pip3 install tito
pushd librepo/
mkdir build
cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr -DENABLE_SELINUX=OFF -DUSE_GPGME=OFF -DWITH_ZCHUNK=OFF -DENABLE_DOCS=OFF -DENABLE_TESTS=OFF
make
make install
popd
pushd modulemd-tools/
git checkout tags/modulemd-tools-0.16-1
pip3 install argparse-manpage createrepo_c dnf koji pytest pyyaml setuptools wheel # Do not approve yet
tito build --rpm --install
pip3 install rpm-py-installer
popd
pushd libdnf/
mkdir build
pushd build/
cmake .. -DPYTHON_DESIRED="3" -DCMAKE_INSTALL_PREFIX:PATH=/usr/ -DWITH_GTKDOC=OFF -DWITH_HTML=OFF -DCMAKE_MODULE_PATH="/usr/share/cmake-3.31/Modules/" -DENABLE_RHSM_SUPPORT=OFF -DWITH_ZCHUNK=OFF
popd
popd
pushd dnf/
mkdir build
pushd build/
cmake .. -DPYTHON_DESIRED="3" -DCMAKE_INSTALL_PREFIX:PATH=/usr/ -DWITH_MAN=0
make
make install
popd
popd
popd
}
function eic.tdnf.install() {
pushd /sources/
echo "[?] Is RPM installed? Because if not, the packages will NOT install!"
read -p "[Y]es, it is. [N]o, it isn't. :" opt
case "$opt" in
Y|y|Yes|yes|YES)
echo "[i] Checking...."
rpm --version || eic.error RPM_NOT_INSTALLED
;;
*)
echo "[i] Install RPM first, by running eic.rpm.install. The script will kick you out now. Rerun me!"
exit 1
;;
esac
git clone https://github.com/openSUSE/libsolv.git
pushd libsolv/
git checkout tags/0.7.31
mkdir build
cd build
cmake .. -DDISABLE_SHARED=OFF -DCMAKE_INSTALL_PREFIX=/usr -DENABLE_RPMDB=ON -DENABLE_RPMMD=ON -DENABLE_RPMPKG=ON -DENABLE_APPDATA=ON &&
make &&
make install
popd
git clone https://github.com/kevadesu/tdnf
pushd tdnf/
git checkout stable-3.5 &&
mkdir build
cd build
CFLAGS="-I/usr/include/rpm -I/usr/include/solv" LDFLAGS="-L/usr/lib -lsolv -lsolvext -lrpm" cmake .. -DCMAKE_INSTALL_PREFIX=/usr -DRPM_INCLUDE_DIR=/usr/include/rpm -DRPM_LIBRARY=/usr/lib/librpm.so -DLIBSOLV_LIBRARY=/usr/lib/libsolv.so -DLIBSOLVEXT_LIBRARY=/usr/lib/libsolvext.so -DLIBSOLV_INCLUDE_DIR=/usr/include/solv -DDISABLE_SHARED=ON -DENABLE_STATIC=ON &&
make &&
make install &&
cat > /etc/tdnf/tdnf.conf << EOF
[main]
gpgcheck=1
installonly_limit=3
clean_requirements_on_remove=0
repodir=/etc/yum.repos.d
cachedir=/var/cache/tdnf
distroverpkg=tylux-release
EOF
popd
popd
}
function eic.bugfix.RrX() {
pushd /sources/
echo "[i] Applying bugfix RrX..."
echo "[i] Removing the following directories: /sources/: gettext/ grep/ bash/ diffutils/ findutils/ patch/"
rm -rv gettext grep bash diffutils findutils patch
echo "[i] Extracting and renaming..."
tar -xvf bash*z
tar -xvf grep*z
tar -xvf gettext*z
tar -xvf diffutils*z
tar -xvf findutils*z
tar -xvf patch*z
mv -v bash-5.2.32 bash
mv -v grep-3.11 grep
mv -v gettext-0.22.5 gettext
mv -v diffutils-3.10 diffutils
mv -v findutils-4.10.0 findutils
mv -v patch-2.7.6 patch
popd
}
function eic.signoff() {
echo 12.2-systemd-tylux > /etc/lfs-release
cat > /etc/lsb-release << "EOF"
DISTRIB_ID="TylkoLinux"
DISTRIB_RELEASE="25.02"
DISTRIB_CODENAME="delirium"
DISTRIB_DESCRIPTION="TylkoLinux Delirium"
EOF
cat > /etc/os-release << "EOF"
NAME="TylkoLinux"
VERSION="25.02 (Delirium)"
VERSION_ID="25.02"
ID=tylux
PRETTY_NAME="TylkoLinux 25.02 Delirium (LFS 12.2-systemd)"
ANSI_COLOR="0;35"
VERSION_CODENAME="delirium"
HOME_URL="https://distrolabs.github.io/"
EOF
}
function eic.error() {
echo "[i] The installer has encountered a critical error and needs to quit."
case "$@" in
D404_SRC)
echo "[!] Directory /sources/ does NOT exist!"
;;
RPM_NOT_INSTALLED)
echo "[!] RPM...is not installed. You liar."
exit 1
;;
*)
echo "[!] We were unable to determine the error."
;;
esac
}
# Those are functions taken from the compatibility checker script created in LFS 12.2-systemd. Shoutout to them!
ver_check()
{
if ! type -p $2 &>/dev/null
then
echo -e "${BRed}ERROR ${Color_Off}| Cannot find $2 ($1)"; return 1;
fi
v=$($2 --version 2>&1 | grep -E -o '[0-9]+\.[0-9\.]+[a-z]*' | head -n1)
if printf '%s\n' "$3" "$v" | sort --version-sort --check &>/dev/null
then
printf "${BGreen}OK ${Color_Off}| %-9s %-6s >= $3\n" "$1" "$v"; return 0;
else
printf "${BRed}ERROR ${Color_Off}| %-9s is TOO OLD ($3 or later required)\n" "$1";
return 1;
fi
}
bail() { echo -e "${BRed}FATAL ${Color_Off}| $1"; exit 1; }
main
Reference in a new issue View git blame Copy permalink